Settings are set from the title, this page is the basic setting.
| Menu | Description |
|---|---|
| System volume | Change the system volume for menu operations, etc. |
| Item volume | Change the volume used for VCI. |
| Guest volume | Change the voice volume of guests in the studio. |
| Video volume | Changes the volume of the item Video Player [Studio]. |
You can adjust the bit rate of the audio sent and received.
(0 to 100 doesn't literally indicate the bit rate)
Adjusts the voice chat volume for yourself.
If you are streaming, you need to separately adjust your voice volume in streaming software.
Change the audio input device such as microphones.
There is a volume gauge below, so you can check the microphone.
It reduces residual echo.
It also has the feature to reduce the volume of output while you are talking.
Process the noises that enter microphone, such as environmental noise, to produce a clean sound.
By enabling this, you can use the following features.
Remove the reflective sound in the room from the audio input.
A feature to detect voice.
It internally detects voice and turns on/off the input.
Automatically adjusts the volume of the microphone input to proper loudness.
When the pre-processor is enabled, the noise reduction (reduces constant sound from wind blow of an air-conditioner or sound from a light source ) is always enabled.
Reduces field of view while moving with controller to reduce the VR sickness.
Setting the moving speed with controller.
| Speed of movement | Speed of the movement when changing the position with controller. |
|---|---|
| Speed of rotation | Speed of the rotation when changing the rotation with controller. |
User settings are read from config.json when starting Virtual Cast.
You can check the location of the config file by clicking “Open the user configuration folder”.
You can change the language setting of Virtual Cast
but, the list of rooms will only show studios broadcasting in the same language.
By clearing the cache of assets, the application frees up storage space.
Click “Delete cache and reset” to initialize the virtual cast settings.
If you click after checking “Reset user settings (config.json)”, the contents of config.json will also be deleted.