====== Studio [Steam Settings] ====== Settings are set from the title, this page is the **studio setting**. ==== Macimum room capacity ==== Sets the number of people who can enter when [[en:virtualcast:setting:system#Boot mode]] is the default. \\ The default setting is 4 people. \\ It can be set from a minimum of 2 to a maximum of 16 people. ==== Macimum number of directviewers allowed ==== Sets the number of people who can enter when [[en:virtualcast:setting:system#Boot mode]] is the directview mode. \\ Specifying a number of 0 persons is equivalent to not allowing entry. \\ The maximum number of people is 6. ==== Enable the chroma key for display ==== Some preset items can be made transparent by chroma key composition. For the setting of the chroma key itself, use [[en/virtualcast/studio/item/laserpointer]] to change the HSV to be used as the chroma key.\\ **The setting is applied per user, if you need your guests to have the same setting, you must ask them to set it for themselves. ** {{virtualcast:config:configjson_displaycapture_chromakey.mp4|}} Applies chroma key composition to the [[en:virtualcast:studio:ringmenu:item#Display|display]] item. ==== Enable the chroma key for external input monitor ==== Applies chroma key composition to the [[en/virtualcast/studio/item/externalinputmonitor]] item. ==== Enable texture cache ==== Usually, images used for [[en/virtualcast/studio/item/whiteboard]] / [[en/virtualcast/studio/item/cribbing]] are downloaded each time they are loaded, but they can be loaded at high speed when reloaded by saving them in a cache. * However, once saved in the cache, the image data is not read from the URL, so even **if the URL image is changed, the first image saved in the cache is displayed.** ==== Item highlight effect ==== Set whether to highlight items when you touch them.\\ Uncheck the box below to highlight it. {{:virtualcast:setting:studio:highlighting_effect1.png?nolink&400|}} ==== Chroma key studio ==== Chroma key studio color can be set from three colors: green, blue and black.