====== General [Steam Settings] ======
Settings are set from the title, this page is the **basic setting**.

===== Sound =====

^Menu^Description^
|System volume|Change the system volume for menu operations, etc.|
|Item volume|Change the volume used for VCI.|
|Guest volume|Change the voice volume of guests in the studio.|
|Video volume|Changes the volume of the item [[en/virtualcast/studio/item/videoplayer]].|



==== Voice chat audio quality ====
You can adjust the bit rate of the audio sent and received.\\
(0 to 100 doesn't literally indicate the bit rate)





==== Mic Input Volume ====
Adjusts the voice chat volume for yourself.\\
If you are streaming, you need to separately adjust your voice volume in streaming software.



==== Input device ====
Change the audio input device such as microphones.\\
There is a volume gauge below, so you can check the microphone.






===== Echo canceler =====
It reduces residual echo.\\
It also has the feature to reduce the volume of output while you are talking.



===== Audio pre-processor =====
Process the noises that enter microphone, such as environmental noise, to produce a clean sound.\\
By enabling this, you can use the following features.

==== Reverb reducer ====
Remove the reflective sound in the room from the audio input.

====Voice detection====
A feature to detect voice.\\
It internally detects voice and turns on/off the input.

====Auto gain adjustment====
Automatically adjusts the volume of the microphone input to proper loudness.

When the pre-processor is enabled, the noise reduction (reduces constant sound from wind blow of an air-conditioner or sound from a light source ) is always enabled.





===== Locomotion =====

==== Reduce motion sickness ====
{{virtualcast:config:basic_option_movefog.mp4?direct&250|}}

Reduces field of view while moving with controller to reduce the VR sickness.\\



==== Speed ====
Setting the moving speed with controller.\\

^Speed of movement|Speed of the movement when changing the position with controller.|
^Speed of rotation|Speed of the rotation when changing the rotation with controller.|





===== Others =====

==== Load user settings ====
User settings are read from [[en:virtualcast:config|config.json]] when starting Virtual Cast.\\
You can check the location of the config file by clicking “Open the user configuration folder”.

==== Language settings ====
You can change the language setting of Virtual Cast\\
but, the list of rooms will only show **studios broadcasting in the same language.**




===== Delete the cache =====

==== Delete the VRM/VCI cache ====
By clearing the cache of assets, the application frees up storage space.

===== Restore default =====
==== Reset user settings (config.json) =====
Click “Delete cache and reset” to initialize the virtual cast settings.\\
If you click after checking "Reset user settings (config.json)", the contents of config.json will also be deleted.